Support Center

Exemples de projets

Sample projects for reinforced concrete design

Concrete

Detail 2D

Choose from the list of reinforced concrete sample projects. You can download them and adapt to the needs of your project.

ACI - Standard Anchoring - Alternate Spread Footing

Télécharger

Anchoring into staged footing and design of reinforcement

Télécharger

Anchoring of a circular column

Télécharger

Strengthening of a RC corbel

Télécharger

ACI - Anchoring of the steel column into concrete foundation

Ouvrir dans la Visionneuse Télécharger

ETABS BIM link for reinforced concrete wall design (EN) — RC wall from ETABS to Detail (EN)

Télécharger

Precast Beam Splice (Beam to Beam Connection)

Ouvrir dans la Visionneuse Télécharger

Steel beam anchored to RC girder

Ouvrir dans la Visionneuse Télécharger

ACI - Spread footing reinforcement

Télécharger

Steal beam into concrete beam

Télécharger

Steal Beam into Concrete Column

Télécharger

Pre-tensioned tapered concrete beam with LTB

Télécharger

Steel beam anchored to RC girder

Ouvrir dans la Visionneuse Télécharger Télécharger

ACI - Anchoring into concrete pile (Pedestal anchoring)

Télécharger

ACI - Tension anchor reinforcement

Ouvrir dans la Visionneuse Ouvrir dans la Visionneuse Télécharger Télécharger

ACI - Pedestal hairpin reinforcement

Ouvrir dans la Visionneuse Télécharger

ACI - Pedestal anchoring reinforcement

Ouvrir dans la Visionneuse Télécharger

Supplementary Reinforcement for Anchors

Télécharger

Anchoring into a wall corner

Télécharger

Eccentrically loaded footing

Télécharger

Prestressed saddle beam with LTB

Télécharger

Anchoring with shear lug

Télécharger

Triangular Pile Cap

Télécharger

Pile Cap 3D

Télécharger

Calculation of Prestressed reinforced concrete beam with the openings the lenght 24m. All checks provided. Designed according EN code in IDEA Statica Detail. — Prestressed 24 m beam with openings

Télécharger

Example of calculation reinforced concrete column with corbel. The column has two parts with different sizes of I-section. Concrete Corbel calculation according to EN code in IDEA StatiCa Detail. — Pre-cast column with corbel

Télécharger

Voile avec des trous non alignés

Télécharger

Voile en béton armé avec trous

Télécharger

Poutre voile (Detail)

Télécharger

Voile en béton armé de 5 étages avec trous (Detail)

Télécharger

Poutre avec suspension

Télécharger

Poutre réduite avec ferraillage avec trous (Detail)

Télécharger

Poutrelle transversale avec trou (Detail)

Télécharger

Poutre de raccordement

Télécharger

Poutre avec trou (Detail)

Télécharger

Pier cap (Detail)

Télécharger Télécharger

Haunched prestressed roof girder

Télécharger

Example of calculation of Water Tank, including crack width check. Calculated according to EN Code in IDEA StatiCa DETAIL. — Water Tank

Télécharger

Calculation of the Reinforced Concrete Truss Beam in IDEA StatiCa DETAIL. ULS and SLS Code check according to ACI code. Example of the possible beam weight reduction. — Prestressed 18.5m beam with openings

Télécharger

This model presents an advanced design of a Concrete Composite Prestressed Slab with a total length of 3.55 meters. It includes detailed calculations of the construction stages, incorporating time-dependent analysis (TDA), and a comprehensive code check. The design adheres to EN standards and was developed using IDEA StatiCa BEAM. — Prestressed 18.5m beam with openings

Télécharger

This demonstration presents a potential beam design featuring a notably interesting and unconventional arrangement of openings. It involves the calculation of a dapped end T-beam with openings along its 10-meter length. Comprehensive checks of the openings have been conducted, and the design is compliant with EN standards, utilizing IDEA StatiCa DETAIL for analysis. — Prestressed 18.5m beam with openings

Télécharger

This analysis focuses on the load-bearing wall with the window opening in the façade and the cantilever. The wall is designed to support the loads transmitted from the roof, which highlights the importance of structural integrity in this configuration. Code-check calculation according to EN code in IDEA StatiCa Detail. — Vertically Loaded Basement Wall

Télécharger

An Example of calculation of the model Concrete Reinforced Vertically Loaded Basement Wall in IDEA StatiCa DETAIL according to ACI (metric units) code. The total length of the wall is 20m. The wall is loaded by a columns. Code-checking of the discontinuity region. — Vertically Loaded Basement Wall

Télécharger

Analyses of behavior inverted T beam, which is supported by Patch Support. Calculated in IDEA StatiCa DETAIL. — Prestressed 18.5m beam with openings

Télécharger

An Example of calculation the model of Concrete Reinforced Prestressed T-Beam, total lenght 25 m. Calculated according EN code in IDEA StitaCa Detail. — Prestressed 18.5m beam with openings

Télécharger

Designing a post-tensioned concrete bridge model with 3 spans. Designed according to EN code. IDEA StatiCa BEAM. — Prestressed concrete bridge

Télécharger

Box girder bridge section

Télécharger

Calculation of the reinforced concrete rounded column with second order effects. EN design code. “P-Delta” effects. — Circular column (Second order Effects)

Télécharger

Calculation of the reinforced concrete wall on beams model. Designed according to EN design code. IDEA StatiCa Detail. — Wall with openings on piles

Télécharger

Calculation of the model a Reinforced Concrete Solid wall Pier Cap. IDEA StatiCa Detail. EN Design code. Neglecting tension spikes. — Pier cap - Bone section

Télécharger

Calculation of the Reinforced Concrete Deep Beam with Opening model, modeled according EN design code. IDEA StatiCa Detail. — Reinforced concrete Deep Beam

Télécharger

Calculation of the inclined reinforced concrete prestressed hammerhead pier cap model. IDEA StatiCa Detail. EN Design code. — Prestressed Hummerhead Pier Cap

Télécharger

Prestressed cross joint — Prestressed cross joint (Detail)

Télécharger

RC composite continuous beam

Télécharger

Bridge deviator

Télécharger

Prestressed beam with openings in IDEA StatiCa — Prestressed beam with openings

Télécharger

Concrete column - Fire design

Télécharger

Reinforced column section - Second order effect (RCS)

Cross-section of column Télécharger

Reinforced concrete 2D section check — Reinforced concrete 2D section (RCS)

Télécharger

Prestressed T-section in IDEA StatiCa — Prestressed concrete I-section (RCS)

Prestressed I-section

Bridge diaphragm — Bridge diaphragm (Detail)

Télécharger

Fire resistance

Télécharger

Wall with opening — Wall with openings (Detail)

Télécharger

Wall with opening — Wall with opening (Detail)

Télécharger

Staircase — Staircase (Detail)

Télécharger

Ribbed slab — Ribbed slab (Detail)

Télécharger

Frame corner — Frame corner (Detail)

Télécharger

Deep beam with large opening — Deep beam with large opening (Detail)

Télécharger

Dapped end with opening — Dapped end with opening (Detail)

Télécharger

Corbel (Detail)

Télécharger

Column — Column (Detail)

Télécharger

Composite beams in IDEA StatiCa Beam app - comparison with midas Civil — Composite beams - comparison with midas Civil

Télécharger

Reinforced concrete slender columns design — RC slender circular column

Télécharger

Pier — Pier (Detail)

Télécharger

Reinforced concrete T-section — Reinforced concrete T-section (RCS)

Télécharger