ESSAI de 14 jours

Choisir langue

Anglais
Tchèque
Allemand
Espagnol
Français
Italien
portugais
Néerlandais
Hongrois
Roumain
Support Center
Exemples de projets

Sample projects for prestressed concrete design

Concrete
RCS
Choose from the list of prestressed concrete sample projects. You can download them and adapt to the needs of your project.
Strengthening of a RC corbel
Strengthening of a RC corbel
Télécharger
Precast beam with LTB analysis (EN)
Precast beam with LTB analysis (EN)
Télécharger
Calculation of Prestressed reinforced concrete beam with the openings the lenght 24m. All checks provided. Designed according EN code in IDEA Statica Detail.
Prestressed 24 m beam with openings
Télécharger
Haunched prestressed roof girder
Haunched prestressed roof girder
Télécharger
This model presents an advanced design of a Concrete Composite Prestressed Slab with a total length of 3.55 meters. It includes detailed calculations of the construction stages, incorporating time-dependent analysis (TDA), and a comprehensive code check. The design adheres to EN standards and was developed using IDEA StatiCa BEAM.
Prestressed 18.5m beam with openings
Télécharger
This demonstration presents a potential beam design featuring a notably interesting and unconventional arrangement of openings. It involves the calculation of a dapped end T-beam with openings along its 10-meter length. Comprehensive checks of the openings have been conducted, and the design is compliant with EN standards, utilizing IDEA StatiCa DETAIL for analysis.
Prestressed 18.5m beam with openings
Télécharger
This analysis focuses on the load-bearing wall with the window opening in the façade and the cantilever. The wall is designed to support the loads transmitted from the roof, which highlights the importance of structural integrity in this configuration. Code-check calculation according to EN code in IDEA StatiCa Detail.
Vertically Loaded Basement Wall
Télécharger
An Example of calculation of the model Concrete Reinforced Vertically Loaded Basement Wall in IDEA StatiCa DETAIL according to ACI (metric units) code. The total length of the wall is 20m. The wall is loaded by a columns. Code-checking of the discontinuity region.
Vertically Loaded Basement Wall
Télécharger
Analyses of behavior inverted T beam, which is supported by Patch Support. Calculated in IDEA StatiCa DETAIL.
Prestressed 18.5m beam with openings
Télécharger
An Example of calculation the model of Concrete Reinforced Prestressed T-Beam, total lenght 25 m. Calculated according EN code in IDEA StitaCa Detail.
Prestressed 18.5m beam with openings
Télécharger
Designing a post-tensioned concrete bridge model with 3 spans. Designed according to EN code. IDEA StatiCa BEAM.
Prestressed concrete bridge
Télécharger
Prestressed Composite Section
Prestressed Composite I Profile Section
Télécharger
Box girder bridge section
Box girder bridge section
Télécharger
Calculation of the inclined reinforced concrete prestressed hammerhead pier cap model. IDEA StatiCa Detail. EN Design code.
Prestressed Hummerhead Pier Cap
Télécharger
Prestressed cross joint
Prestressed cross joint (Detail)
Télécharger
Prestressed beam with openings in IDEA StatiCa
Prestressed beam with openings
Télécharger
Prestressed T-section in IDEA StatiCa
Prestressed concrete I-section (RCS)
Prestressed I-section
Precast hollow core slab
Precast hollow core slab
Télécharger
Continuous composite bridge
Continuous composite bridge
Télécharger
Prestressed box girder bridge
Prestressed box girder bridge
Télécharger
Pretensioned hollow-core beam
Pretensioned hollow-core beam
Télécharger
Pretensioned saddle beam
Pretensioned saddle beam
Télécharger